 |
DAG 4.5G2
|
 |
|
The Endace Accelerated DAG 4.5G2 2-port PCI-X Gigabit Ethernet network monitoring
card provides 100% packet capture and transmit (2 x 1Gbps) on copper or optical
gigabit networks, operating at full line utilization. The Endace Data Stream Manager
(DSM) provides real-time packet filtering and CPU load balancing.
|
 |
DAG 4.5G4
|
|
|
The Endace Accelerated DAG 4.5G4 4-port Gigabit Ethernet network monitoring card
provides 100% packet capture and transmit (4 x 1Gbps) even on copper or optical
gigabit networks operating at full line rate. Data can transfer up to 7Gbps through
the PCI-X Bus Interface to the host system. The Endace Data Stream Manager (DSM)
provides real-time packet filtering and CPU load balancing.
|
 |
DAG 3.6EP/T
|
|
|
The DAG3.6E standard configuration supports receive-only packet capture applications
for 10/100Mb Ethernet networks. The DAG3.6EP provides two genuine Ethernet ports
that are intended for connection to an external splitter or a SPAN monitoring port.
The DAG3.6ET includes an on-board passive tap which keeps the link alive even when
the card is powered down.
|
 |
DAG 4.3GE
|
|
|
The DAG 4.3GE 2-port Ethernet network monitoring card provides 100% packet capture
on both ports even on networks operating at full line utilization, on copper or
optical gigabit links. With the addition of the Endace Application Software Accelerator,
even more compute-intensive tasks can be accelerated by adding the Endace CoPro256
coprocessor to the DAG 4.3GE card, freeing up further CPU resources to focus on
the analysis applications.
|
 |
DAG 8.1X
|
|
| The Endace DAG 8.1X PCI-Express Network Monitoring Card has been optimized to
monitor and inspect traffic on 10 Gigabit Ethernet data centre and
telecommunications networks. It provides full line rate traffic
capture, classification and filtering even in worstcase conditions, enabling
network managers to inspect all traffic on their backbone and peering links for
security threats.
|
 |
DAG 5.2SXA
|
|
|
The Endace DAG 5.2SXA PCI-X Network Monitoring Card has a Single 10 Gigabit Ethernet or Packet-over-SONET OC-192c / SDH STM-64c port. It provides full line rate traffic capture, classification and filtering, enabling inspection of all traffic even under worst case conditions. An integrated CoProcessor enables every packet to be analysed against up to 32,768 rules.
|
 |
DAG 5.2X
|
|
|
The Endace Accelerated DAG 5.2X 10GbE PCI-X Network Monitoring Interface Card provides
full line rate capture and transmit on optical 10 Gigabit Ethernet networks operating
at full line utilization, transfer up to 7Gbps of data through the PCI-X Bus Interface
to the host system. The Endace Data Stream Manager (DSM) provides real-time packet
filtering to overcome the PCI-X bus limitation.
|
| |
DAG Card Support
|
|
|
Endace DAG Card Support provides you with a single, world-wide point of contact
for technical support and access to technical experts to ensure fast issue resolution
for your Endace DAG cards. |
