DAG 9.2X2 - Available now
The Endace DAG® 9.2X2 is the world’s first two port GbE/10GbE PCI-E Gen-II monitoring card capable of line-rate capture to host memory on a full-duplex 10 Gigabit Ethernet link regardless of packet size.
Highlights
- Dual-port network monitoring card utilises SFP+ pluggable optical transceivers supporting:
- IEEE 802.3ae 10 Gb/s Ethernet.
- 100% capture for all frames from 64 to 9600 bytes (including Jumbo frames).
- Designed to integrate easily into host platforms with x8 lane PCI Express 2.0 bus compatibility.
- Unified stream capture of Full-duplex 10 Gigabit Ethernet links.
- Precise nanosecond packet time-stamping with clock synchronization from external time references including GPS and CDMA.
- Support for industry standard packet capture format [libPCAP/WinPCAP].
Technical Specification
| Monitoring Interfaces | Two Enhanced Small Form Factor Pluggable (SFP+) interfaces |
| Network Type | IEEE 802.3ae 10 Gigabit Ethernet |
| Time Synchronization | External: IEEE-1394 connector type for RS-422 PPS signal synchronization from GPS or CDMA receiver Internal: Host PC clock Also able to synchronize with other DAG cards |
| Network Encapsulation | 10GBASE-SR 10GBASE-LR |
| PCI Interface | x8 lane PCI Express Gen. 2.0 |
| Operating Systems Requirements | Endace software is supported on the following operating systems: LINUX, FreeBSD, Windows Server 2003. Please refer to the most recent software Release Notes or contact support@endace.com for system specific information. |
| Power Requirements | 20W |
| Operating Temperature | 0 to 50 deg C |
| Operating Humidity | 5 to 95% non condensing |
| Physical Dimensions | Half height, half length Height 64.25mm (2.53”) Length 167.5mm (6.6”) |
| DAG 9.2X2 |
|---|
 10GigE card |
| DAG 8.1SX |
 10 GigE / Sonet / SDH card. |
| DAG 7.5G2/G4 |
 10/100/1GigE card |
| DAG 7.4S |
SONET (OC-3c/12c, OC-48c) card, |
| DAG 4.5G2/G4 |
 10/100/1GigE Card |
| DAG 3.7T |
 E1/T1/J1 Card |
| DAG 3.7D |
 DS3/E3 Card |