DAG 8.2X single-port Network Monitoring Card

Dag 5.2x product shot

The Endace® DAG® 8.2X Network Monitoring Card has been optimised to monitor and inspect traffic on 10 Gigabit Ethernet networks. It provides full line rate traffic capture, classification and filtering even in worst case conditions. With the power to see all traffic even on high speed links operating at full line utilization, the DAG 8.2X enables network managers to develop solutions that inspect all traffic on their backbone and peering links for security threats, and precisely measure network performance to identify issues that may affect missioncritical applications.

Technical Specification

Network Interface 1x XFP transceiver MMF 850nm LC optical connector1, or;
1x XFP transceiver SMF 1310nm LC optical connector2.
Network Type IEEE802.3ae Ethernet:
1 10GBASE-SR
2 10GBASE-LR
Time Synchronization External: ‘RJ45’ connector for RS-422 PPS Signal from GPS or CDMA receiver
Internal: Host PC clock
Also able to synchronize with other DAG cards
Packet Timestamping 7.5ns clock resolution
PCI Interface 8-lane PCI Express
Minimum Systems Requirements LINU X® version 2.4.x, 2.6.x (32-bit and 64-bit) FreeBSD 4.x, 5.x, 6.x (32-bit) or Windows® XP/Windows Server™ 2000 (32-bit) / 2003 (32-bit and 64-bit)
Intel® Xeon® 1.8Ghz or faster, 1GB RAM, 1 GB disk space for tools installation
One free PCI-e slot supporting 8-lane operation.
Power Requirements Conforms to PCI3.0
Operating Temperature 0 to 55 deg C
Operating Humidity 5 to 95% non condensing
Physical Dimensions Full height, half length PCI3.0
Height 110.75mm (4.2”)
Length 167.5mm (6.6”)
*This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.