The Genius
of DAG®

100% packet capture

The genius of DAG®

DAG® Features & Functions

All you need to
know about DAG

DAG® Features & Functions

Endace Probes - powered by DAG®

High-performance Probes leveraging
the power of
DAG® card

Endace Probes - powered by DAG®

Power your custom application

Your application
our architecture:
a perfect match

Power your custom application
Home » 100% Packet Capture » DAG® 7.4S

DAG 7.4S

SONET (OC2c/12c, OC-48c) card
Featuring 8-lane PCI Express bus, 2 SFP ports

DAG 7.4S

The Endace DAG™ 7.4S network monitoring card provides the flexibility to capture and inspect traffic on SONET [SDH] OC-3c/12c/48c [STM-1c/4c/16c] Packet-Over-SONET and ATM networks with 8-lane PCI Express compatibility. Coupled with an efficient interrupt-free and zero-copy direct memory access [DMA] data path, the DAG 7.4S delivers the power to see all.

In addition to interrupt-free and zero-copy DMA, Endace developed Data Stream Manager [DSM] functionality to increase packet processing performance via hardware-based filtering and load-balancing techniques. DSM effectively accelerates application performance by offloading common features into hardware and ultimately freeing up more CPU resources for packet processing applications.

Highlights

  • Dual-port network monitoring cards using SFP pluggable transceivers supporting:
    • OC-3c/12c/48c [STM-1c/4c/16c] Packet-over-SONET and ATM [OC-3c/12c only].
  • 100% capture into host memory for all frames from 64 to 9600 bytes (including Jumbo frames).
  • Designed to integrate easily into host platforms with 8-lane PCI Express bus compatibility.
  • Full packet, header only or set length packet capture.
  • Two-way CPU load-balancing for increased processing performance.
  • Precise nanosecond packet time-stamping with clock synchronisation from external time references including GPS and CDMA.
  • Support for industry standard packet capture format [libPCAP/WinPCAP].
  • Optional host-based software supports advanced AAL2/AAL5 ATM Reassembly at line-rate.

Technical Specification

Monitoring Interfaces Two small form factor (SFP) interfaces
Network Type SONET [SDH]
OC-3c/12c/48c [STM-1c/4c/16c]
Time Synchronization External: IEEE-1394 connector type for RS-422 PPS signal synchronisation from GPS or CDMA receiver
Internal: Host PC clock
Also able to synchronize with other DAG cards
Network Encapsulation Packet-Over-SONET
ATM Cell Capture [OC-3c/12c only]
PCI Interface 8-lane PCIe [PCIe 1.1]
Operating Systems Requirements Endace software is supported on the following operating systems: LINUX, FreeBSD, Windows Server 2003. Please refer to the most recent software Release Notes or contact support@endace.com for system specific information.
Power Requirements 8.5W
Operating Temperature 0 to 55 deg C
Operating Humidity 5 to 95% non condensing
Physical Dimensions Half height, half length
Height 64.25mm (2.53“)
Length 167.5mm (6.6”)
DAG 9.2X2
9.2X2

10GigE card
Featuring PCI Express 2.0 8-lane bus, 2xSFP+ ports

DAG 8.1SX
8.1SX

10 GigE / Sonet / SDH card.
Featuring 8-lane PCI Express 1.0 bus, 1 x XFP port

DAG 7.5G2/G4
DAG 7.5G2/G4

10/100/1GigE card
Featuring 4-lane PCI Express bus
Available in 2-port or 4-port

DAG 7.4S
DAG 7.4S

SONET (OC-3c/12c, OC-48c) card,
Featuring 8-lane PCI Express 1.0 bus
2xSFP ports

DAG 4.5G2/G4
DAG 4.5G2/G4

10/100/1GigE Card
Featuring PCI-X 133MHz bus
Available in 2-port or 4-port

DAG 3.7T
DAG 3.7T

E1/T1/J1 Card
Featuring PCI 33MHz bus,
16 x RJ45 ports

DAG 3.7D
DAG 3.7D

DS3/E3 Card
Featuring PCI 33MHz bus,
4 x SMB ports