DAG 4.5G2 / G4 2/4 port Network Monitoring Card
The Endace DAG® 4.5G2 and 4.5G4 Network Monitoring Cards with DSM provide 2 or 4 Gbps sustained lossless traffic capture and inspection on 10/100/1000BASE-T and optical Gigabit Ethernet networks. With the power to see all traffic even on high speed links operating at full line utilization, the DAG 4.5G2 and 4.5G4 enable operators to develop solutions that inspect all traffic for internal and external security threats, and precisely measure network performance to identify issues that may affect mission critical applications like financial transaction orders, Voice over IP, and other time sensitive services.
Highlights
- 2/4 ports for 1000BASE-SX or 1000BASE-LX Optical Ethernet or 10/100/1000BASE-T Electrical Ethernet using SFP pluggable transceivers.
- DAG technology provides 100% capture into host memory at full line rate for all IP packets from 64 to 9600 bytes (including Jumbo frames).
- Full packet, header only or set length (truncated) packet capture.
- Full line-rate traffic capture and filtering based on
- Ethertype
- Src/Dst Ethernet MAC Addresses
- 5-Tuple IPv4 packet information (Src/Dst IP addresses, Src/Dst ports, protocol type and protocol flags).
- Non-blocking simultaneous capture and transmit up to 7Gbps total throughput*.
- Link and filter statistics counters for reporting and analysis.
- Two-way CPU load balancing for increased processing performance.
- Precise packet time-stamping and clock synchronization by GPS for applications that require highly accurate measurements over long distances.
- Support for industry standard PCAP capture format (libPCAP / WinPCAP)
- Invisible to all other network elements with no MAC or IP Address assigned to the DAG interface ports.
- Designed to integrate easily into existing server hardware with PCI-X133 bus technology.
- Relative timed data replay option enables precise reproduction of traffic conditions (TR-TERF).
Technical Specification
| SFP Interface Options | 2 or 4x 1000 BASE-SX SFP transceivers MMF
850nm LC optical connectors, or; 2 or 4x 1000 BASE-LX SFP transceivers SMF 1310nm LC optical connectors, or; 2 or 4x 1000 BASE-ZX SFP transceivers SMF 1550nm LC optical connectors or, 2 or 4x 10/100/1000 BASE-T SFP transceivers with ‘RJ-45’/8P8C connectors. |
| Network Type | IEEE802.3 Ethernet |
| Time Synchronization | External: ‘RJ-45’ connector (4.5G4) IEEE-1394 serial
(4.5G2) for RS-422 PPS Signal from GPS or CDMA
receiver. Internal: Host PC clock. Also able to synchronize with other DAG cards. |
| Packet Timestamping | 15ns clock resolution |
| PCI Interface | PCI-X 64-bit 66/100/133MHz 3V (DAG 4.5G2) PCI-X 64-bit 133MHz 3V (DAG 4.5G4) |
| Minimum Systems Requirements | Endace software is supported on the following operating systems: LINUX, FreeBSD, Windows Server 2003.
Please refer to the most recent software Release Notes or contact support@endace.com for system specific information. x86 processor 1GHz or better, 1 GB RAM, 1 GB disk space for tools installation One free PCI-X133 slot. |
| Power Requirements | Less than 20W |
| Operating Temperature | 0 to 55 deg C |
| Operating Humidity | 5 to 95% non condensing |
| Physical Dimensions | 4.5G2 (2-Port) PCI3.0 Half height, half length Height 64.25mm (2.53“) Length 167.5mm (6.6”) 4.5G4 (4-Port) PCI3.0 Full height, half length Height 106.7mm (4.2”) Length 167.5mm (6.6”) |
| *This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. | |
| DAG 9.2X2 |
|---|
 10GigE card |
| DAG 8.1SX |
 10 GigE / Sonet / SDH card. |
| DAG 7.5G2/G4 |
 10/100/1GigE card |
| DAG 7.4S |
SONET (OC-3c/12c, OC-48c) card, |
| DAG 4.5G2/G4 |
 10/100/1GigE Card |
| DAG 3.7T |
 E1/T1/J1 Card |
| DAG 3.7D |
 DS3/E3 Card |